Honda BF40D - Shim Adjustment

11-39
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
7. SHIM ADJUSTMENT
Shim thickness adjustment is made to engage the gears properly by adjusting the position of each gear. Adjust the shim
thickness and select a shim of proper thickness whenever the gear case, vertical shaft and/or bearing is replaced.
<SHIM LOCATION>
[11]
VERTICAL
SHAFT
A: 205.3 0.15 mm (8.08 0.006 in)
C: 158.5 0.45 mm (6.24 0.018 in)
D: 17.0 mm (0.67 in)
+0.008
0
+0.2
0
B: 47.5 0.15 mm (1.87 0.006 in)
[4] Sp (SHIM THICKNESS)
[6] Sf (SHIM THICKNESS)
[3]
GEAR CASE
[8]
32 x 58 x 17 mm
TAPER BEARING
[INNER RACE]
[7]
32 x 58 x 17 mm TAPER BEARING
[OUTER RACE]
[10]
PINION GEAR
[9]
FORWARD BEVEL
GEAR
[12]
25 x 47 x 15 mm
BEARING
[OUTER RACE]
[1]
25 x 47 x 15 mm BEARING
[INNER RACE]
[5]
FORWARD BEVEL
GEAR SHIM
SELECTION: P. 11-43
ADJUSTMENT: P. 11-44
[2]
PINION GEAR SHIM
SELECTION: P. 11-40
298