Honda BF40D - Fuse Box

18-18
b. INSPECTION
• FUSE
If the fuse is blown out, check each wire for short-circuit and
load by referring to the fuse load chart (P. 2-19).
4. FUSE BOX
a. REMOVAL/INSTALLATION
Remove the following parts.
- Engine cover (P. 4-2)
- Electric part cover (P. 18-19)
Install and route the connectors and harnesses in the proper positions (P. 2-60).
[3]
FUSE BOX
[1]
Blown fuse
[6]
FUSE BOX BRACKET
6 x 28 (2)
[1]
FUSE BOX COVER
[4]
CONNECTOR
HOLDER CLIP
[2]
FUSE
INSTALLATION: P. 2-60
[5]
CORD CLAMPER
[2]
FUSE BOX COVER
694