FALCON USER GUIDE
EN2Z-0962GE51 R0715 148
31. In the New Value field, enter the changed parameter value and click the
SUBMIT button.
RESULT: Under Selected Parameters List, the value is updated in the
Value/Unit column.
32. Watch the impact on values under Selected Points List above.
33. To finish, click the BACK button.
RESULT The fast access list is displayed on the Fast Access Lists tab. To
display the fast access list, please refer to the "View/Modify Fast
Access List" section.
34. Click on the Assign Datapoints tab.
To Next Page
Loading...
