USER GUIDE FALCON
157 EN2Z-0962GE51 R0715
6. Click the datapoint you want to be switched.
RESULT: The datapoint will be inserted in the Properties field under
Switched Properties.
7. To edit a datapoint´s details that is selected in the list, click the DETAILS
button.
Or,
8. To apply enhanced mode for switching multiple datapoints, click the
ENHANCED button.
RESULT: The Enhanced property selection dialog box displays.
9. Under Datapoint Filter, define the filter to display desired datapoints to be
switched by doing one of the following:
a. Under Plant, select plant(s) of which datapoints you want to be filtered by
clicking the BROWSE button.
b. Under Point Type, select the point type to be filtered.
NOTE: Inputs cannot be switched.
c. Under # of States, enter the number for multi-state points (MO, MV).
d. Under Point Name, specific datapoint names can be filtered by entering a
search text. Wildcards can be used for filtering. By default all datapoints will
be displayed as indicated by an asterisk. The filter function is case-sensitive.
To display specific datapoint names, enter the desired search text.
10. Click the GO Button to apply the filter.
RESULT: All datapoints matching the filter criteria will be displayed in the
Assignable Datapoints list under Select Property to Switch.
11. Under Assignable Datapoints, select the datapoints to be switched.
To Next Page
Loading...
