USER GUIDE FALCON
201 EN2Z-0962GE51 R0715
On the General the following information is displayed:
Properties
• Object Type
Defaults to event enrollment for all point types.
• Description
Shows the prefix of the event enrollment name as entered in CARE.
Access Rights
Shows the read and write access level of the event enrollment.
To write values to a datapoint, you must have a write access level equal or
higher than the write access level of the event enrollment.
Datapoint details will only be displayed if you have a read access level equal to
or higher than the read access level of the event enrollment.
4. Click SUBMIT button to save settings, and then click CLOSE button.
Elapsed Active Time / Count Limits Observation
NOTE: The elapsed runtime and count limits observation applies to the following
dapoint types: BI, BO, BV.
Purpose Allows observing the state of the elapsed runtime or the count limits.
Procedure 1. In the Details dialog box of the selected datapoint, select the Event
Enrollments tab.
n (event enrollment) n
Here you can select different event enrollments for viewing and edting. Each
event enrollment is displayed as link. By default, event enrollments have the
following naming convention <EE = event enrollment> <datapoint type
abbreviation> <event enrollment type>, for example EE ai. ElapsedActiveTime.
2. To view/edit an event enrollment, click the event enrollment, for example EE ai.
ElapsedActiveTime. The Details dialog box for the selected event enrollment
displays. The Alarming tab is selected by default.
To Next Page
Loading...
