USER GUIDE FALCON
227 EN2Z-0962GE51 R0715
Trend Log
Under Name and Description, the trend log name and its description are
shown.
fff. Enable trending by clicking the ENABLE LOGGING (Status:
Enabled=checked).
If the trend logging is enabled, the trending starts as soon as the start date/time
is reached and ends at stop date/time. During trending the status is active as
indicated by the checked Active option.
ggg. Manually stop trending by clicking the DISABLE LOGGING button (Status:
Enabled=unchecked, Active=unchecked).
Start and Stop Date/Time is defined under Trending Start / Stop Date and
Time on the Settings tab.
Trended Object
Here data about the trended object is displayed, such as:
• Name
Shows the name of the trended object
• From Controller
Shows the controller which the trend object belongs to
To Next Page
Loading...
