USER GUIDE FALCON
247 EN2Z-0962GE51 R0715
RESULT: On the Event Enrollments tab, you can select event enrollments
to enable the controller´s system status alarming and the
alarming of the controller´s Email alarming:
3. To enable event enrollment alarming for the controllers email alarming, click the
EmailAlarming link. To enable event enrollment alarming for the controller´s
system status, see “Enable Event Enrollment Alarming for Controller System
Status” section.
RESULT: After selecting the System Status event enrollment, the Event
Enrollment Details dialog box displays. The Alarming tab is
selected by default. Here the following algorithmic reporting
settings defined in CARE are displayed:
• Notification Class
• Notify Type
• Event State
• Transitions (Acknowledged status and time and date of last
transition)
• Event Type
• BACnet Property State
• BACnet Device State(s) (=Off-Normal-States)
You only can select the transitions to be reported and set the
delay time.
To Next Page
Loading...
