Honeywell MetroSelect Eclipse MS 5145 - Page 99

20–2
³ 9 9 8 0 4 9
Clear Inventory Records – Will clear all stored
bar code data in memory.
³ 1 2 5 6 1 2
Enable Auto Clear Records – Will automatically
clear the stored records in the inventory buffer
after transmission of the records stored.
³ 1 2 5 6 0 2
* Maintain Records
³ 9 9 8 0 4 8
Delete Last Record – Deletes the last bar code
stored.. When the Transmit Quantity Field has
been enabled, each scanned quantity code is a
unique field. If the delete last record bar code is
scanned, it will remove the last quantity code
scanned.
Example:
If a quantity of 103 (Quantity 1, Quantity 0,
and Quantity 3) was scanned but a quantity
of 10 was desired.
1. Scan the delete last record bar code.
2. The Quantity 3 code will be deleted and
a quantity of 10 will be stored.
³ 9 9 8 0 5 0
Transmit All Records – Transmits all stored data
records.
³ 9 9 8 0 5 1
Transmit Record Counters – Will transmit the
number of records and the number of bar codes
currently stored as a 5-digit number separated by
a space.
³ 1 2 3 9 1 5
Transmit Quantity Field – Adds an additional
quantity field for the last item (bar code) scanned.
Once enabled the user is able to enter a numerical
quantity from 1 to 9999 for the last item (bar code)
scanned (see Inventory Quantity Bar Codes,
on page 20–
3).
³ 1 2 3 9 0 5
* Don’t Transmit Quantity Field