43-TV-25-30 Iss.6 GLO Aug 07 UK 73
Comms Menu
(Main Menu > Configure > Setup > Edit Setup> Comms)
Services
Modbus, Web, Email, SNTP, FTP and Peers. See “Comms Services Menu” on page 75
TCP/IP
(Main Menu > Configure > Setup > Edit Setup > Comms > TCP/IP)
Transmission Control Protocol/Internet Protocol.
A protocol for communication between computers, recorders and other devices.
Automatic DNS Names - The recorder will automatically register a unique Network ID using
the serial number. The format is xs-nnnnnn, where nnnnnn is the serial number of the re-
corder. This allows you to locate the recorder for browsing if you are using
DHCP (Dynamic
Host Configuration Protocol).
TCP/IP Settings
• Static IP - Toggle On and Off. With this enabled the IP address will be the same every
time the recorder is powered up. With this feature Off, the recorder’s IP address is cre-
ated dynamically using a DHCP
(Dynamic Host Configuration Protocol) Server. With
this feature On the IP address can be fixed by entering a known available IP address
below.
• IP Address - (Available when Static IP is On). This is an identification address for com-
munications between two devices. The IP Address identifies a specific recorder.
• Sub Net Mask - (Available when Static IP is On). Acts as a filter when identifying an IP
address
• Gateway - (Available when Static IP is On). A configuration parameter transmitted to
each network device
To Next Page
Loading...
Need help?
General
