74 43-TV-25-30 Iss.6 GLO Aug 07 UK
• DNS/WINS/MDNS - Set to Automatic, click on this to activate and de-activate options.
DNS = Domain Name System, WINS = Windows Internet Name Service, MDNS = Man-
aged Data Network Services. See “DNS/WINS/MDNS” on page 74
• Ports - The Port numbers are associated with the IT system in use. Port numbers are
set to a default but can be changed by the user to allow data traffic to use a specified
port. See “Ports” on page 74
DNS/WINS/MDNS
(Main Menu > Configure > Setup > Edit Setup > Comms > TCP/IP > DNS/WINS/MDNS)
Set to Automatic, click on this to activate and de-activate options. DNS = Domain Name Sys-
tem, WINS = Windows Internet Name Service, MDNS = Managed Data Network Services.
• Auto DNS - This is a sub menu for DNS/WINS/MDNS. Toggles On and Off. With this
deactivated the DNS Server address can be changed from the default, if required.
• Pri. DNS Address - This is a sub menu for DNS/WINS/MDNS. Only available when
Auto DNS is deactivated.
• Sec. DNS Address - This is a sub menu for DNS/WINS/MDNS. Only available when
Auto DNS is deactivated.
• Auto WINS - This is a sub menu for DNS/WINS/MDNS. Toggles On and Off. With this
deactivated the Windows Internet Name Service can be changed from the default, if
required.
• Pri. WINS Address - This is a sub menu for DNS/WINS/MDNS. Only available when
Auto WINS is deactivated.
• Sec. WINS Address - This is a sub menu for DNS/WINS/MDNS. Only available when
Auto WINS is deactivated.
• Auto MDNS - This is a sub menu for DNS/WINS/MDNS. Toggles On and Off. This will
deactivate the Managed Data Network Services.
When the setup is complete go back to the TCP/IP menu and complete the Comms setup.
Ports
(Main Menu > Configure > Setup > Edit Setup > Comms > TCP/IP > Ports)
The port numbers are associated with the IT system in use. Port numbers are set to a default
but can be changed by the user to allow data traffic to use a specified port.
• HTTP - HyperText Transport Protocol is the communications protocol that enables Web
browsing. Select and enter the desired port number if required. (Defaults to 80)
• Modbus - communications protocol used for automation applications. Select and enter
the desired port number if required. (Defaults to 502)
When the setup is complete go back to the TCP/IP menu and complete the Comms setup.
When the configuration is complete select the Finish button to Commit, Discard or Commit
Later. Select the Back button to return to the previous menu.
To Next Page
Loading...
Need help?
General
