To Disable or Enable Alarms
Disabling alarms prevents the system from triggering false alarms during testing and
maintenance.
1. Select the analyzer and point from the keypad. The selected points turn dark gray on the
keypad.
2. Choose Selected Point Only to enable / disable an alarm on a single point
or
Choose All Points for Location to enable / disable all of the alarms associated with a
location.
3. Touch Alarm Enable or Alarm Disable to change the state of the point. A disabled alarm
turns light blue. An enabled alarm turns green in the point status window.
Vertex M 103 User Manual
To Next Page
Loading...
