Honeywell Vertex M - Ethernet;Ip

8.8.6 Ethernet/IP
Ethernet/IP provides highly reliable communications over fast, economical Ethernet media. For
more information, see www.odva.org.
In the Vertex M this interface is always a server, never a client. Further details on the Anybus X-
gateway Article AB7831-F which is used in the Vertex M is available at www.anybus.com.
Indicator Lights
The meaning of indicator lights on the lower half of the gateway is as listed in Table 8.13.
LEDLabel Indication Meaning
GW Status
Green Communication running
Red Communication error
Flashing Network Interface Error
Link 1 (X2.1)
Red (flashing) 10 Mbit/s
Green (flashing) 100 Mbit/s
Off Link not detected
MS
Green (solid) Normal operation
Green (flashing) Standby, not yet configured
Red (solid) Major unrecoverable fault
Red (flashing) Minor recoverable fault
Alternating red/green Hardware self-test
Off No power
NS
Green (solid) Ethernet/IP connections OK
Green (flashing) No Ethernet/IP connection
Red Duplicate IP address
Red (flashing) Connection timeout
Alternating red/green Hardware self-test
Off No power
Link 2 (X2.2)
Red (flashing) 10 Mbit/s
Green (flashing) 100 Mbit/s
Off Link not detected
Table 8.13
Vertex M 240 User Manual