Honeywell Vertex M - Vertex M with Windows 10

6.10.2 Vertex M with Windows 10
1. Touch Project then Stop Project to stop the Vertex M application. To perform this step, an
appropriate access rights are required.
2. Make an offline backup copy of the files listed below in Table 6-3. The following files on the
Vertex M should be copied to either a backup location on your local area network,
removable media, or a CD-R/CD-RW/DVD disk.
File Name Purpose Location
*.za_Vt Configuration Profiles C:\HMI\P_Util
CM72Data.dsn ODBC Datasource for Event Database C:\HMI
ConcData.dsn
ODBC Datasource for Concentration
Database
C:\HMI
CM72.mdb* Event database C:\HMI
CM72Conc.mbd* Concentration Database C:\HMI
chemcam.accdb* ChemCam Database C:\HMI\ChemCam
* Required if stored locally on the Vertex System
NOTE: Database files are size limited to a maximum of 2Gb.
Table 6-3: File Location – Vertex with Windows 10
Vertex M 138 User Manual