Honeywell Vertex M - Point Detail Display Area

Fault Indicators
In addition to changing color, an event window opens indicating a new event.
A yellow square inside the status bar in the analyzer block indicates an analyzer-specific fault. A
yellow square inside of the point block indicates a point-specific fault.
l
See "Maintenance Faults" on page143 for more information.
l
See "Information Events" on page152 for more information.
5.3.2 Point Detail Display Area
The Point Detail Area (see Figure 5-1) displays comprehensive information about each location.
Touching a block in the System Display Area displays the current information about a location.
Config File The configuration profile file name
User ID The name of the current, logged in user
Location The short name of the sampled location
Tier- Slot-
Point
Points are identified by the tier, slot and their point number in which the
analyzer is installed
Point
Points not needed for monitoring may be disabled. A disabled point does not
trigger alarms
l
See "Event History" on page92 for more information.
l
See "Data Trend" on page97 for more information.
l
See "Event List" on page100 for more information.
Vertex M 85 User Manual