Honeywell Vertex M - Series 1 Rack Network Interface and Options

8.7 Series 1 Rack Network Interface and Options
Network interface options currently available on Vertex M are:
Standard:
OLE for Process Control (OPC) Interface. See "OLE for Process Control (OPC) Interface" on the
facing page for more information.
Options:
The Vertex M can be fitted with any one of six optional fieldbus interfaces as summarized in
table F-1.
Protocol Name Honeywell part number
Profibus - DP 1295-0275
DeviceNet 1295-0329
ControlNet 1295-0394*
DF1 1295-0343
ModBus Plus 1295-0330
LonWorks 1295-0328
Modbus/TCP 1295-0520
Ethernet/CIP 1295-0519
* Part Number obsolete
Table 8-5. Vertex M Fieldbus Options
CAUTION
Do not install routers between the optional PLC fieldbus networks and the internet. These
networks are not de- signed to resist cyberattack so their cabling must have rigorous
physical isolation from malicious traffic.
Optional Remote Display Software.
The Vertex M can be ordered with an optional remote display capability as described in see
"Vertex M Remote Display Setup" on page212
Vertex M 190 User Manual