5.3.1 System Display Area
The System Display Area displays information about all of the points in the Vertex M system.
Each of the 72 blocks in the System Display Area represents one point. A group of eight blocks
represents an analyzer block. The analyzer block has the status bar indicator at the top of the
block. A pyrolyzer displays as a blue block in slot 1 and points detail in slot 2.
The System Display Area positions the modules in the same order in which they are physically
located in monitor. The currently selected point displays a green border. If more than one point
has the same gas location as the selected point, all points in same location display with green
border.
Status Indicators
The indicator displays brief information about analyzer status such as faults, warnings or
maintenance functions in process.
Vertex M 82 User Manual
To Next Page
Loading...
