Honeywell Vertex M - General Safety; Manufacturer; Vertex M Series Rack and Analyzer Definitions

2.2.1 Manufacturer
The Vertex M system is manufactured by:
Honeywell
405 Barclay Boulevard
Lincolnshire, IL 60069 USA
www.sps.honeywell.com
2.2.2 General Safety
Follow all installation and operational instructions to ensure the safe and reliable operation of
this unit.
If this monitor is used in a manner not specified by Honeywell, the protection provided by the
equipment may be impaired.
2.2.3 Vertex M Series Rack and Analyzer Definitions
Series 1 – Serial number 290-0001 through 290-0499
l
Initial product release
Series 3 – Serial number 290-6000
l
Rack changes:
l
Introduction of Windows® 10
l
Updated Allen Bradley PLC from Allen Bradley SLC500 to CompactLogix 5380
l
Replaced Active Display with Windows® 10 Remote Desktop
* Refer to Appendix 8.5 through 8.11 for supported Network, Analog output cards and Relay
cards per Series rack.
Vertex M 14 User Manual