Honeywell Vertex M - Page 197

Folder
Tag
Count
Recommended
for most HMI
systems
Tag Name
Format
Value Interpretation / Descrip-
tion
equivalent to Filter Left as
displayed in Diagnostics/Anlyzer
Info.
Reset 0
Monitor 9 Y Az#
Integer monitoring state for
entire analyzer , see table below
0 = Idle
1 = Pyrolyzer Warmup
2 = Monitoring
3 = Loading Chemcassette
4 = Loading new program
5 = Loading new configuration
6 = Flow auto-balance
7 = Performing Line Integrity
Test
SGas_Name 72 ##_1
String gas name abbreviation,
e.g. AsH
3
Unit 72 ##_1
String, either ppm ppb or
mg/m
3
Table 8-7. Tag Names
Note: The Vertex M uses the same OPC server as the Vertex. Thus numerous OPC tags exist for
non-existent analyzers. Tags for points greater than 24 or analyzers greater than 3 are not
populated and invalid.
Vertex M 197 User Manual