TIP: Adding the Vertex M IP address to the IE Favorites folder saves time.
The Vertex M HMI will appear in Internet Explorer as shown in Figure 8-12. The virtual Vertex M
interface can be displayed on most screen sizes (1024 X 768 is a minimum, however larger
screens are better for this application).
Figure 8-12. Vertex M HMI in Internet Explorer
Full Desktop Station Setup
This adapts a desktop computer for complete HMI functionality including the Chemcam Viewer.
However, the Configuration Editor and Chemcassette installation screens are not available
remotely.
Vertex M Client is distributed on the Vertex M Application Software CD.
Remote configuration is possible but requires changing many security settings. Contact
Honeywell for information on permitting remote configuration.
WARNING
The procedures provided in this section require making changes to the computer’s
security and component settings. Only qualified personnel should undertake this
procedure.
Vertex M 215 User Manual
To Next Page
Loading...
