Figure 8-48. LITAccess
Pressing the Line Integrity Test button shown in Figure 8-49 causes the form shown in Figure
8-50 (in "LIT Access from the HMI" on the next page) to appear.
The three times displayed on the left of the new tabsheet indicate the TWA times. (TWA times
are set on Data Logging tabsheet.)
The checkbox and labels on the right of the new page will become black if any of the left-side
checkboxes are checked. Otherwise the right-side items will become gray.
The checkmark itself indicates the status of the point- specific checkboxes shown in Figure 8-
48. If the point- specific LIT checkboxes are all set, this checkmark will be set.
Figure 8-49. Configuration Editor New Button
Vertex M 269 User Manual
To Next Page
Loading...
