Honeywell Vertex M - Page 8

8.7.5 DeviceNet Interface (P/N 1295-0329) 204
8.7.6 ControlNet Interface 204
8.7.7 DF1 Interface (P/N 1295-0343) 205
8.7.8 Modbus Plus Interface (P/N 1295-0330) 206
8.7.9 LonWorks Interface (P/N 1295-0329) 206
8.7.10 Modbus/TCP (P/N 1295-0520) 207
8.7.11 Ethernet/CIP (P/N 1295-0519) 211
8.7.12 Vertex M Remote Display Setup 212
8.7.13 Demonstrating Remote OPC Communication 224
8.8 Series 3 PLC Network Interface and Options 229
8.8.1 Common Considerations of Anybus Communicator 232
8.8.2 Common Considerations of Anybus X-Gateways 236
8.8.3 Profibus - DP 239
8.8.4 Profinet 239
8.8.5 Modbus/TCP 239
8.8.6 Ethernet/IP 240
8.8.7 DeviceNet 241
8.8.8 ControlNet 243
8.8.9 OPC Interface 244
8.9 Series 1 Rack 4-20mA Analog Output Option 259
8.9.1 Overview 259
8.9.2 Hardware Requirements 259
8.9.3 Configuration Requirements 259
8.9.4 Operational Description 260
8.10 Series 3 Rack 4-20mA Analog Output Option 263
8.10.1 Overview 263
8.10.2 Electrical Isolation 263
8.10.3 Hardware Requirements 263
8.10.4 Configuration Requirements 264
8.10.5 Operational Description 264
8.11 Line Integrity Test Option 267
8.11.1 Pneumatic Overview 267
8.11.2 Quantitative Performance 268
Vertex M 8 User Manual