HP 5920 Series Configuration Guide

41
• User object class
If the LDAP server contains many directory levels, a user DN search starting from the root directory can
take a long time. To improve efficiency, you can change the start point by specifying the search base DN.
To configure LDAP user attributes:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter LDAP server view.
ldap server server-name N/A
3. Specify the user search base
DN.
search-base-dn base-dn
By default, no user search base DN
is specified.
4. (Optional.) Specify the user
search scope.
search-scope { all-level |
single-level }
By default, the user search scope is
all-level.
5. (Optional.) Specify the
username attribute.
user-parameters
user-name-attribute
{ name-attribute | cn | uid }
By default, the username attribute
is cn.
6. (Optional.) Specify the
username format.
user-parameters
user-name-format { with-domain |
without-domain }
By default, the username format is
without-domain.
7. (Optional.) Specify the user
object class.
user-parameters user-object-class
object-class-name
By default, no user object is
specified, and the default user
object class on the LDAP server is
used.
The default user object class varies
by device.
Creating an LDAP scheme
You can configure up to 16 LDAP schemes. An LDAP scheme can be referenced by multiple ISP domains.
To create an LDAP scheme:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create an LDAP scheme
and enter its view.
ldap scheme ldap-scheme-name
By default, no LDAP scheme is defined.
Specifying the LDAP authentication server
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter LDAP scheme view.
ldap scheme ldap-scheme-name N/A
3. Specify the LDAP
authentication server.
authentication-server server-name
By default, no LDAP authentication
server is specified.
Displaying and maintaining LDAP
Execute the display command in any view.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English