HP 5920 Series Configuration Guide

32
You can configure SNMP parameters to control the output of these SNMP notifications. For more
information, see Network Management and Monitoring Configuration Guide.
To enable SNMP notifications for RADIUS:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable SNMP notifications for
RADIUS.
snmp-agent trap enable radius
[ accounting-server-down |
authentication-error-threshold |
authentication-server-down |
accounting-server-up |
authentication-server-up ] *
By default, all types of SNMP
notifications are enabled for
RADIUS.
Displaying and maintaining RADIUS
Execute display commands in any view and reset commands in user view.
Task Command
Display the RADIUS scheme
configuration.
display radius scheme [ radius-scheme-name ]
Display RADIUS packet statistics. display radius statistics
Clear RADIUS statistics. reset radius statistics
Configuring HWTACACS schemes
Configuration task list
Tasks at a
g
lance
(Required.) Creating an HWTACACS scheme
(Required.) Specifying the HWTACACS authentication servers
(Optional.) Specifying the HWTACACS authorization servers
(Optional.) Specifying the HWTACACS accounting servers
(Required.) Specifying the shared keys for secure HWTACACS communication
(Optional.) Specifying a VPN for the scheme
(Optional.) Setting the username format and traffic statistics units
(Optional.) Specifying the source IP address for outgoing HWTACACS packets
(Optional.) Setting HWTACACS timers
(Optional.) Displaying and maintaining HWTACACS
Creating an HWTACACS scheme
Create an HWTACACS scheme before performing any other HWTACACS configurations. You can
configure up to 16 HWTACACS schemes. An HWTACACS scheme can be referenced by multiple ISP
domains.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English