HP 5920 Series Configuration Guide

169
Ste
p
Command Remarks
6. Configure the password
complexity checking policy.
password-control complexity
{ same-character | user-name }
check
By default, the system does not
perform password complexity
checking.
7. Set the maximum number of
history password records for
each user.
password-control history
max-record-num
The default setting is 4.
8. Specify the maximum number
of login attempts and the
action to be taken when a
user fails to log in after the
specified number of attempts.
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for 1
minute before trying again.
9. Set the number of days during
which a user is notified of the
pending password expiration.
password-control
alert-before-expire alert-time
The default setting is 7 days.
10. Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
password-control
expired-user-login delay delay
times times
By default, a user can log in three
times within 30 days after the
password expires.
11. Set the maximum account idle
time.
password-control login idle-time
idle-time
The default setting is 90 days.
Setting user group password control parameters
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a user group and enter
user group view.
user-group group-name
By default, no user group exists.
For information about how to
configure a user group, see
"Configuring AAA."
3. Configure the password
expiration time for the user
group.
password-control aging aging-time
By default, the password
expiration time of the user group
equals the global password
expiration time.
4. Configure the minimum
password length for the user
group.
password-control length length
By default, the minimum password
length of the user group equals the
global minimum password length.
5. Configure the password
composition policy for the
user group.
password-control composition
type-number type-number
[ type-length type-length ]
By default, the password
composition policy of the user
group equals the global password
composition policy.
6. Configure the password
complexity checking policy
for the user group.
password-control complexity
{ same-character | user-name }
check
By default, the password
complexity checking policy of the
user group equals the global
password complexity checking
policy.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English