HP 5920 Series Configuration Guide

17
No. Sub-attribute Descri
p
tion
203 Input-Interval-Packets
Number of packets input within an accounting interval in the unit set on
the NAS.
204 Output-Interval-Packets
Number of packets output within an accounting interval in the unit set on
the NAS.
205 Input-Interval-Gigawords Amount of bytes input within an accounting interval, in units of 4G bytes.
206 Output-Interval-Gigawords
Amount of bytes output within an accounting interval, in units of 4G
bytes.
207 Backup-NAS-IP Backup source IP address for sending RADIUS packets.
255 Product_ID Product name.
FIPS compliance
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode (see "Configuring FIPS") and non-
FIPS mode.
AAA configuration considerations and task list
To configure AAA, complete these tasks on the NAS:
1. Configure the required AAA schemes.
{ Local authentication—Configure local users and the related attributes, including the usernames
and passwords, for the users to be authenticated.
{ Remote authentication—Configure the required RADIUS, HWTACACS, and LDAP schemes.
2. Configure AAA methods for the users' ISP domains. Remote AAA methods need to reference the
configured RADIUS, HWTACACS, and LDAP schemes.
Figure 10 AAA configuration procedure
Configure the RADIUS, HWTACACS,
or LDAP schemes to be referenced
none/ local (the default)/ scheme
Authorization method
Accounting method
Configure AAA methods for
different types of users or/and
the default methods for all
types of users
Create an ISP domain
and enter its view
Authentication method
Configure local users and related
attributes
+
+
Local AAA
Remote AAA
No AAA
none/ local (the default)/ scheme
none/ local (the default)/ scheme

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English