Configuration Menu 101
The following table describes the SNMPv3 Group Configuration Menu options.
Table 89 SNMPv3 Group Configuration Menu options
Command Description
model
usm|snmpv1|snmpv2
Defines the security model.
uname <1-32
characters>
Sets the user name as defined in /cfg/sys/ssnmp/snmpv3/usm/name. The user
name can have a maximum of 32 characters.
gname <1-32
characters>
Configures the name for the access group as defined in
/cfg/sys/ssnmp/snmpv3/access/name. The group name can have a maximum
of 32 characters.
del Deletes the vacmSecurityToGroup entry.
cur Displays the current vacmSecurityToGroup configuration.
SNMPv3 Community Table configuration
Command: /cfg/sys/ssnmp/snmpv3/comm
[SNMPv3 snmpCommunityTable 1 Menu]
index - Set community index
name - Set community string
uname - Set USM user name
tag - Set community tag
del - Delete communityTable entry
cur - Display current communityTable configuration
This command is used for configuring the community table entry. The configured entry is stored in the community table
list in the SNMP engine. This table is used to configure community strings in the Local Configuration Datastore (LCD)
of SNMP engine.
The following table describes the SNMPv3 Community Table Configuration Menu options.
Table 90 SNMPv3 Community Table Configuration Menu options
Command Description
index <1-32
characters>
Configures the unique index value of a row in this table. The index can have a maximum of
32 characters.
name <1-32
characters>
Defines the name as defined in /cfg/sys/ssnmp/snmpv3/usm/name. The name
can have a maximum of 32 characters.
uname <1-32
characters>
Defines a readable 32 character string that represents the corresponding value of an SNMP
community name in a security model.
tag <1-255
characters>
Configures a tag of up to 255 characters maximum. This tag specifies a set of transport
endpoints to which a command responder application sends an SNMP trap.
del Deletes the community table entry.
cur Displays the community table configuration.
To Next Page
Loading...
