HP GbE2c - Blc Layer 2/3 Fiber SFP Option - VLANs Configuration

Configuration Menu 139
IGMP filter definition
Command: /cfg/l3/igmp/igmpflt/filter <1-16>
[IGMP Filter 1 Definition Menu]
range - Set IP Multicast address range
action - Set filter action
ena - Enable filter
dis - Disable filter
del - Delete filter
cur - Display current IGMP filter configuration
The following table describes the IGMP Filter Definition Menu options.
Table 146 IGMP Filter Definition Menu
Command Description
range <IP multicast address> <IP
multicast address>
Configures the range of IP multicast addresses for this filter.
Enter the first IP multicast address of the ranger, followed by
the second IP multicast address of the range.
action allow|deny
Allows or denies multicast traffic for the IP multicast
addresses specified.
ena Enables this IGMP filter.
dis Disables this IGMP filter.
del Deletes this filter’s parameter definitions.
cur Displays the current IGMP filter.
IGMP filtering port configuration
Command: /cfg/l3/igmp/igmpflt/port <port number>
[IGMP Port 17 Menu]
filt - Enable/disable IGMP Filtering on port
add - Add IGMP filter to port
rem - Remove IGMP filter from port
cur - Display current IGMP Filtering Port configuration
The following table describes the IGMP Port Filtering Configuration Menu options.
Table 147 IGMP Filtering Port Menu
Command Description
filt enable|disable
Enables or disables IGMP Filtering on this port.
add <1-16> Adds an IGMP filter to this port.
rem <1-16> Removes an IGMP filter from this port.
cur
Displays the current IGMP filter parameters for this port.