Information Menu 58
Use this command to display link status information about each port on a switch, including:
• Port number
• Port speed (10 Mb/s, 100 Mb/s, 1000 Mb/s, or any)
• Duplex mode (half, full, or any)
• Flow control for transmit and receive (no, yes, or any)
• Link status (up or down)
Port information
Command: /info/port
Port Tag RMON PVID NAME VLAN(s)
---- --- ---- ---- -------------- -------------------------------
1 n d 1 Downlink1 1
2 n d 1 Downlink2 1
3 n d 1 Downlink3 1
4 n d 1 Downlink4 1
5 n d 1 Downlink5 1
6 n d 1 Downlink6 1
7 n d 1 Downlink7 1
8 n d 1 Downlink8 1
9 n d 1 Downlink9 1
10 n d 1 Downlink10 1
11 n d 1 Downlink11 1
12 n d 1 Downlink12 1
13 n d 1 Downlink13 1
14 n d 1 Downlink14 1
15 n d 1 Downlink15 1
16 n d 1 Downlink16 1
17 n d 1 Xconnect1 1
18 n d 1 Xconnect2 1
19 n d 4095 Mgmt 4095
20 n d 1 Uplink1 1
21 n d 1 Uplink2 1
22 n d 1 Uplink3 1
23 n d 1 Uplink4 1
24 n d 1 Uplink5 1
Port information includes:
• Port number
• Whether the port uses VLAN tagging or not (y or n)
• Whether Remote Monitoring (RMON) is enabled or disabled (e or d)
• Port VLAN ID (PVID)
• Port name
• VLAN membership
To Next Page
Loading...
Need help?
General