Information Menu  45  
 
 
Show all IP Route information 
Command: /info/l3/route/dump 
Status code: * - best 
Destination        Mask          Gateway         Type      Tag       Metr If 
---------------  --------------- --------------- --------- --------- ---- -- 
* 11.0.0.0       255.0.0.0       11.0.0.1        direct    fixed          211 
* 11.0.0.1       255.255.255.255 11.0.0.1        local     addr           211 
* 11.255.255.255 255.255.255.255 11.255.255.255  broadcast broadcast      211 
* 12.0.0.0       255.0.0.0       12.0.0.1        direct    fixed          12 
* 12.0.0.1       255.255.255.255 12.0.0.1        local     addr           12 
* 12.255.255.255 255.255.255.255 12.255.255.255  broadcast broadcast      12 
* 13.0.0.0       255.0.0.0       11.0.0.2        indirect  ospf      2    211 
* 47.0.0.0       255.0.0.0       47.133.88.1     indirect  static         24 
* 47.133.88.0    255.255.255.0   47.133.88.46    direct    fixed          24 
* 172.30.52.223  255.255.255.255 172.30.52.223   broadcast broadcast 2 
* 224.0.0.0      224.0.0.0       0.0.0.0         martian   martian 
* 224.0.0.5      255.255.255.255 0.0.0.0         multicast addr 
 
 
The following table describes the Type parameter.  
Table 28  IP Routing Type information 
Field Description 
indirect 
The next hop to the host or subnet destination will be 
forwarded through a router at the Gateway address. 
direct 
Packets will be delivered to a destination host or subnet 
attached to the switch. 
local 
Indicates a route to one of the switch’s IP interfaces. 
broadcast 
Indicates a broadcast route.  
martian 
The destination belongs to a host or subnet which is filtered 
out. Packets to this destination are discarded. 
multicast 
Indicates a multicast route. 
 
The following table describes the Tag parameter.  
Table 29  IP Routing Tag information 
Field Description 
fixed 
The address belongs to a host or subnet attached to the 
switch. 
static 
The address is a static route which has been configured on 
the GbE2c Switch. 
addr 
The address belongs to one of the switch’s IP interfaces. 
rip 
The address was learned by the Routing Information Protocol 
(RIP).  
ospf 
The address was learned by Open Shortest Path First (OSPF). 
broadcast 
Indicates a broadcast address. 
martian 
The address belongs to a filtered group.