HP GbE2c - Blc Layer 2/3 Fiber SFP Option - RMON Alarm Information; RMON Event Information

Information Menu 56
RMON alarm information
Command: /info/rmon/alarm
RMON Alarm group configuration:
Index Interval Type rLimit fLimit rEvtIdx fEvtIdx last value
----- -------- ---- -------- -------- ------- ------- ----------
1 30 abs 10 0 1 0 0
2 900 abs 0 10 0 2 0
3 300 abs 10 20 0 0 0
4 1800 abs 10 0 1 0 0
5 1800 abs 10 0 1 0 0
8 1800 abs 10 0 1 0 56344540
10 1800 abs 10 0 1 0 0
11 1800 abs 10 0 1 0 0
15 1800 abs 10 0 1 0 0
18 1800 abs 10 0 1 0 0
100 1800 abs 10 0 1 0 0
Index OID
----- ------------------------------
1 1.3.6.1.2.1.2.2.1.10.257
2 1.3.6.1.2.1.2.2.1.11.258
3 1.3.6.1.2.1.2.2.1.12.259
4 1.3.6.1.2.1.2.2.1.13.260
5 1.3.6.1.2.1.2.2.1.14.261
8 1.3.6.1.2.1.2.2.1.10.280
10 1.3.6.1.2.1.2.2.1.15.262
11 1.3.6.1.2.1.2.2.1.16.263
15 1.3.6.1.2.1.2.2.1.19.266
18 1.3.6.1.2.1.2.2.1.10.279
100 1.3.6.1.2.1.2.2.1.17.264
The following table describes the RMON Alarm Information parameters.
Table 42 RMON Alarm Information Menu /info/rmon/alarm
Command
Index Displays the index number that identifies each alarm instance.
Interval Displays the time interval over which data is sampled and compared with the rising and falling
thresholds.
Type Displays the method of sampling the selected variable and calculating the value to be compared
against the thresholds, as follows:
abs: absolute value, the value of the selected variable is compared directly with the thresholds at
the end of the sampling interval.
delta: delta value, the value of the selected variable at the last sample is subtracted from the current
value, and the difference compared with the thresholds.
rLimit Displays the rising threshold for the sampled statistic.
fLimit Displays the falling threshold for the sampled statistic.
rEvtIdx Displays the rising alarm event index that is triggered when a rising threshold is crossed.
fEvtIdx Displays the falling alarm event index that is triggered when a falling threshold is crossed.
Last value Displays the last sampled value.
OID Displays the MIB Object Identifier for each alarm index.
RMON event information
Command: /info/rmon/event