HP GbE2c - Blc Layer 2/3 Fiber SFP Option - VLAN Information; Layer 2 General Information; Layer 3 Information

Information Menu 43
VLAN information
Command: /info/l2/vlan
VLAN Name Status Ports
---- -------------------------------- ------ ----------------
1 Default VLAN ena 4 5
2 pc03p ena 2
7 pc07f ena 7
11 pc04u ena 11
14 8600-14 ena 14
15 8600-15 ena 15
16 8600-16 ena 16
17 8600-17 ena 17
18 35k-1 ena 18
19 35k-2 ena 19
20 35k-3 ena 20
21 35k-4 ena 21
22 pc07z ena 22
24 redlan ena 24
300 ixiaTraffic ena 1 12 13 23
4000 bpsports ena 3-6 8-10
4095 Mgmt VLAN dis empty
This information display includes all configured VLANs and all member ports that have an active link state.
VLAN information includes:
• VLAN Number
• VLAN Name
• Status
• Port membership of the VLAN
Layer 2 general information
Command: /info/l2/gen
STP uplink fast mode : disabled
The following table describes the Layer 2 general information.
Table 25 L2 general information
Field Description
STP uplink fast mode Displays the status of STP Uplink Fast: enabled or disabled.
Layer 3 information
Command: /info/l3
[Layer 3 Menu]
route - IP Routing Information Menu
arp - ARP Information Menu
ospf - OSPF Routing Information Menu
rip - RIP Routing Information Menu
ip - Show IP information
igmp - Show IGMP Snooping Multicast Group information
vrrp - Show Virtual Router Redundancy Protocol information
dump - Dump all layer 3 information