HP GbE2c - Blc Layer 2/3 Fiber SFP Option - Snmpv3 Group Table Information; Snmpv3 Community Table Information

Information Menu 26
The following table describes the SNMPv3 Access Table information.
Table 11 Access Table parameters
Field Description
Group Name Displays the name of group.
Prefix Displays the prefix that is configured to match the values.
Model Displays the security model used, for example, SNMPv1, or SNMPv2 or USM.
Level Displays the minimum level of security required to gain rights of access. For example,
noAuthNoPriv, authNoPriv, or auth-Priv.
Match Displays the match for the contextName. The options are: exact and prefix.
ReadV Displays the MIB view to which this entry authorizes the read access.
WriteV Displays the MIB view to which this entry authorizes the write access.
NotifyV Displays the Notify view to which this entry authorizes the notify access.
SNMPv3 Group Table information
Command: /info/sys/snmpv3/group
Sec Model User Name Group Name
---------- ----------------------------- -------------------------------
snmpv1 v1v2only v1v2grp
usm adminmd5 admingrp
usm adminsha admingrp
A group is a combination of security model and security name that defines the access rights assigned to all the
security names belonging to that group. The group is identified by a group name.
The following table describes the SNMPv3 Group Table information.
Table 12 Group Table parameters
Field Description
Sec Model Displays the security model used, which is any one of: USM, SNMPv1, SNMPv2, and SNMPv3.
User Name Displays the name for the group.
Group Name Displays the access name of the group.
SNMPv3 Community Table information
Command: /info/sys/snmpv3/comm
Index Name User Name Tag
---------- ---------- -------------------- ----------
trap1 public v1v2only v1v2trap
This command displays the community table information stored in the SNMP engine.