Statistics Menu 86
Table 74 SNMP statistics
Statistics Description
snmpProxyDrops The total number of GetRequest-PDUs, GetNextRequest-PDUs,GetBulkRequest-PDUs,
SetRequest-PDUs, and InformRequest-PDUs delivered to the SNMP entity which were
silently dropped because the transmission of the message to a proxy target failed in
a manner (other than a time-out) such that no Response-PDU could be returned.
NTP statistics
Command: /stats/ntp
NTP statistics:
Primary Server:
Requests Sent: 17
Responses Received: 17
Updates: 1
Secondary Server:
Requests Sent: 0
Responses Received: 0
Updates: 0
Last update based on response from primary server.
Last update time: 18:04:16 Tue Mar 13, 2006
Current system time: 18:55:49 Tue Mar 13, 2006
The switch uses NTP (Network Timing Protocol) version 3 to synchronize the switch’s internal clock with an atomic
time-calibrated NTP server. With NTP enabled, the switch can accurately update its internal clock to be consistent
with other devices on the network and generates accurate syslogs.
The following table describes the NTP statistics:
Table 75 NTP statistics
Statistics Description
Primary Server Requests Sent: The total number of NTP requests the switch sent to the primary NTP
server to synchronize time.
Responses Received: The total number of NTP responses received from the primary
NTP server.
Updates: The total number of times the switch updated its time based on the NTP
responses received from the primary NTP server.
Secondary Server Requests Sent: The total number of NTP requests the switch sent to the secondary NTP
server to synchronize time.
Responses Received: The total number of NTP responses received from the secondary
NTP server.
Updates: The total number of times the switch updated its time based on the NTP
responses received from the secondary NTP server.
Last update based on
response from primary
server
Last update of time on the switch based on either primary or secondary NTP response
received.
Last update time
The time stamp showing the time when the switch was last updated.
Current system time
The switch system time when the command /stats/ntp was issued.
To Next Page
Loading...
