Statistics Menu 78
OSPF global statistics
NOTE: OSPF commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
Command: /stats/l3/ospf/general
OSPF stats
----------
Rx/Tx Stats: Rx Tx
-------- --------
Pkts 0 0
hello 23 518
database 4 12
ls requests 3 1
ls acks 7 7
ls updates 9 7
Nbr change stats: Intf change Stats:
hello 2 up 4
start 0 down 2
n2way 2 loop 0
adjoint ok 2 unloop 0
negotiation done 2 wait timer 2
exchange done 2 backup 0
bad requests 0 nbr change 5
bad sequence 0
loading done 2
n1way 0
rst_ad 0
down 1
Timers kickoff
hello 514
retransmit 1028
lsa lock 0
lsa ack 0
dbage 0
summary 0
ase export 0
The following table describes the OSPF global statistics:
Table 66 OSPF global statistics
Statistic Description
Rx Tx stats:
Rx Pkts
The sum total of all OSPF packets received on all OSPF areas and interfaces.
Tx Pkts
The sum total of all OSPF packets transmitted on all OSPF areas and interfaces.
Rx Hello
The sum total of all Hello packets received on all OSPF areas and interfaces.
Tx Hello
The sum total of all Hello packets transmitted on all OSPF areas and interfaces.
Rx Database
The sum total of all Database Description packets received on all OSPF areas and
interfaces.
Tx Database
The sum total of all Database Description packets transmitted on all OSPF areas and
interfaces.
Rx ls Requests
The sum total of all Link State Request packets received on all OSPF
areas and interfaces.
Tx ls Requests
The sum total of all Link State Request packets transmitted on all OSPF areas and
interfaces.
Rx ls Acks
The sum total of all Link State Acknowledgement packets received on all OSPF areas
and interfaces.
Tx ls Acks
The sum total of all Link State Acknowledgement packets transmitted on all OSPF
areas and interfaces.
Rx ls Updates
The sum total of all Link State Update packets received on all OSPF areas and
interfaces.
To Next Page
Loading...
