Information Menu 24
The following table describes the SNMPv3 Information Menu options.
Table 8 SNMPv3 Information Menu options
Command Usage
usm Displays User Security Model (USM) table information.
view Displays information about view name, subtrees, mask and type of view.
access Displays View-based Access Control information.
group Displays information about the group that includes the security model, user name, and
group name.
comm Displays information about the community table.
taddr Displays the Target Address table.
tparam Displays the Target parameters table.
notify Displays the Notify table.
dump Displays all the SNMPv3 information.
SNMPv3 USM User Table information
Command: /info/sys/snmpv3/usm
usmUser Table:
User Name Protocol
-------------------------------- --------------------------------
adminmd5 HMAC_MD5, DES PRIVACY
adminsha HMAC_SHA, DES PRIVACY
v1v2only NO AUTH, NO PRIVACY
The User-based Security Model (USM) in SNMPv3 provides security services such as authentication and privacy of
messages. This security model makes use of a defined set of user identities displayed in the USM user table. The USM
user table contains information like:
• the user name
• a security name in the form of a string whose format is independent of the Security Model
• an authentication protocol, which is an indication that the messages sent on behalf of the user can be
authenticated
• the privacy protocol.
The following table describes the SNMPv3 User Table information.
Table 9 User Table parameters
Field Description
User Name This is a string that represents the name of the user that you can use to access the switch.
Protocol This indicates whether messages sent on behalf of this user are protected from disclosure using a
privacy protocol. GbE2c software supports DES algorithm for privacy. The software also supports
two authentication algorithms: MD5 and HMAC-SHA.
To Next Page
Loading...
