HP GbE2c - Blc Layer 2/3 Fiber SFP Option - User Access Control Configuration; User ID Configuration

Configuration Menu 105
User Access Control configuration
Command: /cfg/sys/access/user
[User Access Control Menu]
uid - User ID Menu
eject - Eject user
usrpw - Set user password (user)
opw - Set operator password (oper)
admpw - Set administrator password (admin)
cur - Display current user status
The following table describes the User Access Control menu options.
Table 96 User Access Control Configuration menu options
Command Description
uid <1-10> Displays the User ID Menu for the selected user.
eject <1-10> Ejects the selected user from the switch.
usrpw <1-128 characters> Sets the user (user) password (maximum 128 characters). The user has no direct
responsibility for switch management. He or she can view switch status information
and statistics, but cannot make any configuration changes.
opw <1-128 characters> Sets the operator (oper) password (maximum 128 characters). The operator
manages all functions of the switch. He or she can view all switch information and
statistics and can reset ports or the entire switch.
admpw <1-128 characters> Sets the administrator (admin) password (maximum 128 characters). The super user
administrator has complete access to all menus, information, and configuration
commands on the switch, including the ability to change both the user and
administrator passwords.
cur Displays the current user status.
User ID configuration
Command: /cfg/sys/access/user/uid
[User ID 1 Menu]
cos - Set class of service
name - Set user name
pswd - Set user password
ena - Enable user ID
dis - Disable user ID
del - Delete user ID
cur - Display current user configuration
The following table describes the User ID Configuration menu options.
Table 97 User ID Configuration menu options
Command Description
cos
<user|oper|admin>
Sets the Class-of-Service to define the user’s authority level.
name <1-8
characters>
Defines the user name.
pswd <1-128
characters>
Sets the user password of up to 128 characters maximum.
ena Enables the user ID.
dis Disables the user ID.
del Deletes the user ID.
cur Displays the current user ID parameters.