Configuration Menu 99
Table 86 User Security Model Configuration Menu options
Command Description
name <1-32
characters>
Configures a string up to 32 characters long that represents the name of the user. This is the
login name that you need in order to access the switch.
auth md5|sha|none Configures the authentication protocol between HMAC-MD5-96 or HMAC-SHA-96. The
default algorithm is none.
authpw Configures your password for authentication. If you selected an authentication algorithm using
the above command, you need to provide a password; otherwise you will get an error
message during validation.
priv des|none Configures the type of privacy protocol on the switch. The privacy protocol protects messages
from disclosure. The options are
des (CBC-DES Symmetric Encryption Protocol) or none. If
you specify
des as the privacy protocol, then be sure that you have selected one of the
authentication protocols (MD5 or HMAC-SHA-96). If you select
none as the authentication
protocol, you will get an error message.
privpw Configures the privacy password.
del Deletes the USM user entries.
cur Displays the USM user entries.
SNMPv3 View configuration
Command: /cfg/sys/ssnmp/snmpv3/view
[SNMPv3 vacmViewTreeFamily 1 Menu]
name - Set view name
tree - Set MIB subtree(OID) which defines a family of view subtrees
mask - Set view mask
type - Set view type
del - Delete vacmViewTreeFamily entry
cur - Display current vacmViewTreeFamily configuration
The following table describes the SNMPv3 View Configuration Menu options.
Table 87 SNMPv3 View Configuration Menu options
Command Description
name <1-32 characters> Defines the name for a family of view subtrees up to a maximum of 32
characters.
tree <1-32 characters> Defines the Object Identifier (OID), a string of maximum 32 characters, which
when combined with the corresponding mask defines a family of view subtrees.
An example of an OID is
1.3.6.1.2.1.1.1.0
mask <1-32 characters> Defines the bit mask, which in combination with the corresponding tree defines
a family of view subtrees. The mask can have a maximum of 32 characters.
type included|excluded Selects whether the corresponding instances of
vacmViewTreeFamilySubtree and
vacmViewTreeFamilyMask define a family of view subtrees, which is
included in or excluded from the MIB view.
del Deletes the vacmViewTreeFamily group entry.
cur Displays the current vacmViewTreeFamily configuration.
To Next Page
Loading...
