HP GbE2c - Blc Layer 2/3 Fiber SFP Option - IGMP Static Multicast Router Configuration; IGMP Filtering Configuration

Configuration Menu 138
IGMP static multicast router configuration
Command: /cfg/l3/igmp/mrouter
[Static Multicast Router Menu]
add - Add port as Multicast Router Port
rem - Remove port as Multicast Router Port
cur - Display current Multicast Router configuration
The following table describes the Static Multicast Router Configuration Menu options.
NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast routers is
disabled for that VLAN.
Table 144 IGMP Static Multicast Router Menu
Command Description
add <port number> <1-4095> <1-2>
Selects a port/VLAN combination on which the static multicast router
is connected, and configures the IGMP version (1 or 2) of the
multicast router.
NOTE: Port number must be an external port (19-24).
remove <port number> <1-4095> <1-2>
Removes a static multicast router from the selected port/VLAN
combination.
cur
Displays the current IGMP Static Multicast Router parameters.
IGMP filtering configuration
Command: /cfg/l3/igmp/igmpflt
[IGMP Filter Menu]
filter - IGMP Filter Definition Menu
port - IGMP Filtering Port Menu
ena - Enable IGMP Filtering
dis - Disable IGMP Filtering
cur - Display current IGMP Filtering configuration
The following table describes the IGMP Filter Configuration Menu options.
Table 145 IGMP Filtering Menu
Command Description
filter <1-16>
Displays the IGMP Filter Definition Menu.
port <port number> Displays the IGMP Filtering Port Menu.
ena Enables IGMP filtering globally.
dis Disables IGMP Filtering globally.
cur Displays the current IGMP Filtering parameters.