HP GbE2c - Blc Layer 2/3 Fiber SFP Option - Link Status Information

Information Menu 57
RMON Event group configuration:
Index Type Last Sent Description
----- ---- ---------------- ---------------------------------
1 both 0D: 0H: 1M:20S Event_1
2 none 0D: 0H: 0M: 0S Event_2
3 log 0D: 0H: 0M: 0S Event_3
4 trap 0D: 0H: 0M: 0S Event_4
5 both 0D: 0H: 0M: 0S Log and trap event for Link Down
10 both 0D: 0H: 0M: 0S Log and trap event for Link Up
11 both 0D: 0H: 0M: 0S Send log and trap for icmpInMsg
15 both 0D: 0H: 0M: 0S Send log and trap for icmpInEchos
100 both 0D: 0H: 0M: 0S Event_100
The following table describes the RMON Event Information parameters.
Table 43 RMON Event Information Menu /info/rmon/event
Command Usage
Index Displays the index number that identifies each event instance.
Type Displays the type of notification provided for this event, as follows: none, log, trap, both.
Last Sent Displays the time that passed since the last switch reboot, when the most recent event was triggered.
This value is cleared when the switch reboots.
Description Displays a text description of the event.
Link status information
Command: /info/link
------------------------------------------------------------------
Port Speed Duplex Flow Ctrl Link
---- ----- -------- --TX-----RX-- ------
1 1000 any yes yes down
2 1000 any yes yes down
3 1000 full yes yes down
4 1000 full yes yes down
5 1000 any yes yes down
6 1000 any yes yes down
7 1000 any yes yes down
8 1000 full no yes up
9 1000 full yes yes down
10 1000 full yes yes down
11 1000 any yes yes down
12 1000 any yes yes down
13 1000 any yes yes down
14 1000 any yes yes down
15 1000 any yes yes down
16 1000 any yes yes down
17 100 full yes yes down
18 100 full yes yes down
19 100 full yes yes down
20 100 full yes yes down
21 1000 full yes yes down
22 any any yes yes down
23 any any yes yes down
24 any any yes yes down