HP GbE2c - Blc Layer 2/3 Fiber SFP Option User Manual

Viewing statistics 105
The following table describes IP Routing Management statistics for the selected interface:
Table 84 IP Routing Management Statistics
Statistic Description
General
InReceives The total number of input datagrams received from interfaces, including those received in
error.
InDelivers The total number of input datagrams successfully delivered to IP user-protocols (including
ICMP).
FwdDatagrams The number of input datagrams for which this entity (the switch) was not their final IP
destination, as a result of which an attempt was made to find a route to forward them to
that final destination.
In entities which do not act as IP Gateways, this counter will include only those packets,
which were Source-Routed via this entity (the switch), and the Source- Route option
processing was successful.
FragOKs The number of IP datagrams that have been successfully fragmented at this entity (the
switch).
Frag Creates The number of IP datagram fragments that have been generated as a result of
fragmentation at this entity (the switch).
InDiscards The number of input IP datagrams for which no problems were encountered to prevent their
continued processing, but which were discarded (for example, for lack of buffer space).
This counter does not include any datagrams discarded while awaiting re-assembly.
IP Interface Statistics
ifInOctets The total number of octets received on the interface, including framing characters.
ifInNuCastPkts The number of packets, delivered by this sublayer to a higher sublayer, which were
addressed to a multicast or broadcast address at this sublayer. This object is deprecated in
favor of ifInMulticastPkts and ifInBroadcastPkts.
ifInErrors For packet-oriented interfaces, the number of inbound packets that contained errors
preventing them from being delivered to a
higher-layer protocol.
For character-oriented or fixed-length interfaces, the number of inbound transmission units
that contained errors preventing them from being deliverable to a higher-layer protocol.
ifOutOctets The total number of octets transmitted out of the interface, including framing characters.
ifOutNucastPkts The total number of packets that higher-level protocols requested to be transmitted, and
which were addressed to a multicast or broadcast address at this sublayer, including those
that were discarded or not sent.
This object is deprecated in favor of ifOutMulticastPkts and ifOutBroadcastPkts.
ifOutErrors For packet-oriented interfaces, the number of outbound packets that could not be
transmitted because of errors.
For character-oriented or fixed-length interfaces, the number of outbound transmission units
that could not be transmitted because of errors.
ifInUcastPkts The number of packets, delivered by this sublayer to a higher sublayer, which were not
addressed to a multicast or broadcast address at this sublayer.
ifInDiscards The number of inbound packets which were chosen to be discarded even though no errors
were detected to prevent their being delivered to a higher-layer protocol. One possible
reason for discarding such a packet could be to free up buffer space.
ifInUnknownProtos The number of locally addressed datagrams received successfully but discarded because of
an unknown or unsupported protocol.
ifOutUcastPkts The total number of packets that higher-level protocols requested to be transmitted, and
which were not addressed to a multicast or broadcast address at this sublayer, including
those that were discarded or not sent.
ifOutDiscards The number of outbound packets that were chosen to be discarded even though no errors
had been detected to prevent their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General

Brand	HP
Model	GbE2c - Blc Layer 2/3 Fiber SFP Option
Category	Switch
Language	English