HP GbE2c - Blc Layer 2/3 Fiber SFP Option User Manual

Configuring the switch 186
OSPF Route Redistribution Configuration
NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Route Redistribution (click the
underlined text, not the folder).
The following table describes the OSPF Route Redistribution Configuration controls:
Table 154 OSPF Route Redistribution Configuration controls
Control Descriptions
Metric (1-16777215, 0=none) Exports the routes of this protocol as external OSPF AS-external LSAs in which the metric
and metric type are specified. To remove a previous configuration and stop exporting the
routes of the protocol, enter
none.
AS External Metric Type Exports the routes of this protocol as external OSPF AS-external LSAs in which the metric
and metric type are specified. To remove a previous configuration and stop exporting the
routes of the protocol, enter
none.
Route Maps Available Lists the route maps that can be added to the list of OSPF static route.
Out Route Map List Lists the route maps that are members of the OSPF static route.
Select a route map number in the Route Maps Available list and click Add to add the
route map to the list of static routes.
Select a route map number in the Out Route Map list and click Remove to remove the
route map from the list of static routes.

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General

Brand	HP
Model	GbE2c - Blc Layer 2/3 Fiber SFP Option
Category	Switch
Language	English