HP GbE2c - Blc Layer 2/3 Fiber SFP Option

Configuring the switch 164
Network Filters Configuration
NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, select Layer 3 > Network Filters (click the underlined text, not the folder).
This form summarizes network filter parameters.
The following table describes Network Filters Configuration controls:
Table 133 Network Filters Configuration controls
Control Description
Search Operation To focus the search for a network filter, enter optional search parameters:
• Network Filter ID
• IP address and subnet mask
• State
Fields that have a value of “any” are ignored during the search.
Choose a search operation:
• or: Search for network filters specified in the Search range that meet any of the criteria
entered.
• and: Search for network filters specified in the Search range that meet all of the criteria
entered.
Click Search to display network filters that fit the range and meet the criteria entered.