Configuring the switch 153
The following table describes the Uplink Fast Configuration controls:
Table 121 Uplink Fast Configuration controls
Control Description
Enabled? Enables or disables Fast Uplink Convergence, which provides rapid Spanning Tree
convergence to an upstream switch during failover.
Note: When enabled, this feature increases bridge priorities to 65500 for all STGs
and path cost by 3000 for all external STP ports.
Update Rate (10-200) Configures the station update rate. The default value is 40.
RMON History Configuration Table
To display the following form, select RMON > History (click the underlined text, not the folder).
The following table describes the RMON History Groups Configuration controls:
Table 122 RMON History Configuration controls
Control Description
Search Range To search for a History Group, enter a range of numbers in the From and To fields.
Search Options To focus the search for a History Group, enter optional search parameters:
• MIB OID
• Requested Number of Buckets
Fields that have a value of “any” are ignored during the search.
Choose a search operation:
• or: Search for History Groups specified in the search range that meet any of the criteria
entered.
• and: Search for History Groups specified in the search range that meet all of the criteria
entered.
Click Search to display History Groups that fit the range and meet the criteria entered.
To Next Page
Loading...
Need help?
General