HP GbE2c - Blc Layer 2/3 Fiber SFP Option User Manual

Configuring the switch 197
Bootstrap Protocol Relay Configuration
NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, select Layer 3 > Bootstrap Protocol Relay.
The following table describes the Bootstrap Protocol Relay configuration controls:
Table 165 Bootstrap Protocol Relay Configuration controls
Control Description
BOOTP Server IP Address Sets the IP address of the BOOTP server.
Secondary BOOTP Server IP
Address
Sets the IP address of the secondary BOOTP server.
BOOTP State Enables or disables the use of BOOTP. If you enable BOOTP, the GbE2c will query its
BOOTP server for all of the GbE2c IP parameters. The default value is enable.
IP Routing General Configuration
To display the following form, select Layer 3 > General.
The following table describes the IP Routing General Configuration controls:
Table 166 IP Routing General Configuration controls
Control Description
*IP Forwarding Enabled? Enables or disables IP Forwarding.
*Enable Forwarding Directed
Broadcasts?
Enables or disables forwarding directed broadcasts.

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General

Brand	HP
Model	GbE2c - Blc Layer 2/3 Fiber SFP Option
Category	Switch
Language	English