Configuring the switch 183
OSPF Virtual Links Configuration
NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Virtual Links (click the underlined
text, not the folder).
This form provides a summary of the state of OSPF virtual links.
OSPF Virtual Link Configuration
NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, go to the OSPF Virtual Links Configuration form. Select a virtual link number, or
open the OSPF Virtual Links folder and click Add OSPF Virtual Link.
To Next Page
Loading...
