EasyManuals Logo

HP GbE2c - Blc Layer 2/3 Fiber SFP Option User Manual

HP GbE2c - Blc Layer 2/3 Fiber SFP Option
209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
Viewing statistics 64
TCP/IP Statistics (IF and IP Statistics)
To display the following form, go to the Management Processor Statistics form. Select one of the following: IF
Stats, IP Stats, ICMP Stats, or TCP Stats.
The following table describes the interface statistics:
Table 45 IF statistics
Statistics Description
ifInOctets The total number of octets received on the interface, including framing characters.
ifInUcastPkts The number of packets, delivered by this sublayer to a higher sublayer, which were not addressed to
a multicast or broadcast address at this sublayer.
ifInNUCastPkts The number of packets, delivered by this sublayer to a higher sublayer, which were addressed to a
multicast or broadcast address at this sublayer. This object is deprecated in favor of ifInMulticastPkts
and ifInBroadcastPkts.
ifOutOctets The total number of octets transmitted out of the interface, including framing characters.
ifOutUcastPkts The total number of packets that higher-level protocols requested to be transmitted, and which were
not addressed to a multicast or broadcast address at this sublayer, including those that were
discarded or not sent.
ifOutNUcastPkts The total number of packets that higher-level protocols requested to be transmitted, and which were
addressed to a multicast or broadcast address at this sublayer, including those that were discarded
or not sent.
This object is deprecated in favor of ifOutMulticastPkts and ifOutBroadcastPkts.
ifInErrors For packet-oriented interfaces, the number of inbound packets that contained errors preventing them
from being delivered to a higher-layer protocol.
For character-oriented or fixed-length interfaces, the number of inbound transmission units that
contained errors preventing them from being deliverable to a higher-layer protocol.
ifInDiscards The number of inbound packets that were chosen to be discarded even though no errors were
detected to prevent their being delivered to a higher-layer protocol. One possible reason for
discarding such a packet could be to free up buffer space.

Table of Contents

Other manuals for HP GbE2c - Blc Layer 2/3 Fiber SFP Option

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP GbE2c - Blc Layer 2/3 Fiber SFP Option and is the answer not in the manual?

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General IconGeneral
BrandHP
ModelGbE2c - Blc Layer 2/3 Fiber SFP Option
CategorySwitch
LanguageEnglish

Related product manuals