Configuring the switch 163
IP Static ARP Configuration
To display the following form, go to the Static ARP Configuration form. Select a static ARP ID number, or open
the ARP folder and click Add Static ARP.
The following table describes ARP Configuration controls:
Table 132 IP Static ARP Configuration controls
Control Description
ARP Table Index (1-128) Configures the table index number for the static ARP entry.
IP Configures the IP address of the host.
MAC Configures the MAC address of the host.
VLAN Configures the VLAN ID for the host.
Port Configures the port to which the host connects.
To Next Page
Loading...
