HP GbE2c - Blc Layer 2/3 Fiber SFP Option User Manual

Dashboard 32
Table 15 Switch Spanning Tree Groups Information controls
Control Description
Bridge Max Age Specifies, in seconds, the maximum time the bridge waits without receiving a configuration
bridge protocol data unit before it reconfigures the STP network. If the bridge is not the root
bridge, it uses the
MaxAge value of the root bridge.
This command does not apply to MSTP.
Bridge Forward Delay Specifies, in seconds, the amount of time that a bridge port has to wait before it changes from
learning state to forwarding state. If the bridge is not the root bridge, it uses the
Forward
Delay
value of the root bridge.
This command does not apply to MSTP.
Bridge Aging Time Specifies, in seconds, the amount of time the bridge waits without receiving a packet from a
station before removing the station from the Forwarding Database.
Select a Spanning Tree Group number to display detailed information.
Switch Spanning Tree Group Information
To display the following form, go to the Switch Spanning Tree Groups Information form. Select a Spanning Tree
Group number.

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General

Brand	HP
Model	GbE2c - Blc Layer 2/3 Fiber SFP Option
Category	Switch
Language	English