HP GbE2c - Blc Layer 2/3 Fiber SFP Option User Manual

Configuring the switch 194
VRRP Interface Configuration
NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, go to the Virtual Routers Configuration form. Select a VRRP interface number or
open the VRRP Interfaces folder and click Add Virtual router Interface.
The following table describes the VRRP Interface Configuration controls:
Table 162 VRRP Interface Configuration controls
Control Descriptions
IP Interface (1-256) Defines the IP interface.
Authentication? Defines the type of authentication that will be used: none (no authentication), or
password (password authentication).
Password Defines a plain text password up to eight characters long. This password will be added to
each VRRP packet transmitted by this interface when password authentication is chosen
(see
Authentication above).

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General

Brand	HP
Model	GbE2c - Blc Layer 2/3 Fiber SFP Option
Category	Switch
Language	English