Dashboard 43
Table 26 Route Table Information controls
Control Description
Mask Displays the subnet mask for the IP route.
Gateway Displays the IP address of the gateway associated with the IP route.
Type Displays the IP route type. See the IP Routing Type information table for more
detail.
Tag Displays the IP route tag. See the IP Routing Tag information table for more
detail.
Metric Displays the value of the IP route metric.
IF Displays the interface number associated with the IP route.
The following table describes the Route Table Type parameter.
Table 27 IP Routing Type information
Field Description
indirect The next hop to the host or subnet destination will be forwarded through a
router at the Gateway address.
direct Packets will be delivered to a destination host or subnet attached to the
switch.
local Indicates a route to one of the switch’s IP interfaces.
broadcast Indicates a broadcast route.
martian The destination belongs to a host or subnet which is filtered out. Packets to this
destination are discarded.
multicast Indicates a multicast route.
The following table describes the Route Table Tag parameter.
Table 28 IP Routing Tag information
Field Description
fixed The address belongs to a host or subnet attached to the switch.
static The address is a static route which has been configured on the GbE2c.
addr The address belongs to one of the switch’s IP interfaces.
rip The address was learned by the Routing Information Protocol (RIP).
ospf The address was learned by Open Shortest Path First (OSPF).
broadcast The address is a broadcast address.
multicast The address is a multicast address.
martian The address belongs to a filtered group.
To Next Page
Loading...
Need help?
General